Teletech TX916 Loop-A-Line Kit

Teletech TX916 Loop-A-Line Kit

Cable pair tracing and a lot more, Loop-a-Line products can remotely control a far end device (the oscillator) for up to 20km of cable.

In a normal situation (without a Loop-a-Line) once a linesman has located a pair at the far end, he cannot make tests because the oscillator or tone sender is still connected at the other end. Thus either another person is needed at the far end, or the linesman has to travel to the far end to remove the oscillator before fault location can commence.

Using a Loop-a-Line allows the linesman to remotely change the state of the oscillator to any of five different states. Therefore eliminating the need for multiple journeys along the cable path.